Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why North Miami Beach Homeowners Choose Therma-Tru Construction
We provide independent Therma-Tru construction service in North Miami Beach, FL – repairing, installing, and servicing Therma-Tru fiberglass and steel entry door systems for homeowners who already own the brand or are choosing it for a coastal home. What sets our Therma-Tru work apart is that we’re not tied to the manufacturer, so our recommendations come from what we see in the field on this coastline rather than from a sales quota. We’re not affiliated with or authorized by Therma-Tru; we’re an independent service provider that works on the brand regularly.
North Miami Beach gives Therma-Tru doors a specific job to do. Salt air, year-round humidity, and direct summer sun work on fiberglass skins, weatherstripping, and finishes in ways that inland installations never see. We build every entry service around those conditions – inspecting the frame and sill for hidden moisture before we touch the slab, then specifying components that will hold up under the same exposure again.
Call (844) 651-6043 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Trust North Miami Beach Construction for Your Therma-Tru Construction?
Our technicians have up to 9 years of experience with entry door systems, and much of that time has been spent on the Therma-Tru lines that dominate this market – Classic-Craft, Smooth-Star, Fiber-Classic, and Benchmark. We know how each of these behaves after a few hurricane seasons on the Intracoastal: where the hairline cracks start, which frames rot first, and why a door that closed perfectly in year one binds by year five.
Quality parts matter. We use components that fit Therma-Tru equipment properly rather than forcing universal hardware onto a door system engineered to tighter tolerances. For structural components – frames, sills, glass inserts – OEM Therma-Tru parts are our preference because they preserve the fit and performance the door was designed around. For wear items like weatherstripping and sweeps, high-quality aftermarket products can be a cost-effective and reliable alternative. We source from both directions based on what the door actually needs.
Every job is done warranty-safe. We follow flashing and sealing practices that protect the integrity of your existing Therma-Tru coverage rather than voiding it, and we walk you through what the manufacturer’s warranty does and doesn’t cover before work begins. You get a written estimate up front and a fixed price with no change orders.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in North Miami Beach
Therma-Tru builds a solid product. But coastal exposure is unforgiving, and the failures we see in North Miami Beach tend to follow predictable patterns. Here’s what we encounter most often.
- Hairline cracks and blisters along the door edges. Fiberglass skins on Classic-Craft and Smooth-Star doors absorb sun on west- and south-facing entries, and over years of UV and moisture cycling, hairline cracks form near the bottom rail and blisters can lift along the edges. Left alone, these open a path for water into the door core.
- Warping and delamination from heat buildup. A dark-colored door in direct sun can build significant surface heat. On Fiber-Classic slabs, that heat causes the skin to separate or the slab to warp, which throws off the alignment and makes the door bind against the frame.
- Failed weatherstripping and sweeps. This is the most common problem we see on coastal entries. Salt air and humidity degrade the seals faster than they would inland, and once the weatherstripping fails, wind-driven rain reaches the frame. That leads to frame rot and interior water damage if it isn’t caught early.
- Peeling and fading finish. Factory-painted and stained surfaces on Therma-Tru doors take a beating from UV and salt exposure. Peeling finish is cosmetic on its own, but it exposes the substrate beneath and accelerates every other problem on this list.
- Sticking, binding, and misalignment. A door that’s hard to close is usually a symptom, not the problem itself. Thermal movement in the slab, a settling frame, or a compromised hinge can all cause it, and the fix depends on which one is actually happening.
One detail worth knowing: a typical Therma-Tru fiberglass door in a coastal North Miami Beach home might show hairline cracks near the bottom rail after years of sun and salt-air exposure. A qualified local pro would first inspect the frame and sill for hidden water damage, then determine whether the door can be repaired with a new skin or needs a full replacement. The fix usually involves installing a new pre-hung Therma-Tru unit with proper flashing and sealing to prevent recurrence. That order of operations matters – repairing the skin without checking the frame just postpones the real problem.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We don’t stock OEM or genuine Therma-Tru parts, and we’re not a dealer. What we do is source quality parts that fit Therma-Tru equipment correctly, choosing between OEM and aftermarket based on where the part sits in the door system.
Our repair-versus-replace decision comes down to the frame and the core. Cosmetic problems – a faded finish, a cracked skin, worn weatherstripping – are usually repairable. When the frame or door core is compromised by water intrusion or rot, patching it is a short-term fix, and we’ll tell you so honestly. Replacing the entire door system is the more sensible call at that point, even though it’s the larger invoice.
- Repair territory: finish restoration, skin repair, weatherstripping and sweep replacement, hinge and hardware adjustment.
- Replace territory: rotted frame or sill, delaminated slab, warped core, or a door that’s failed structurally in multiple places at once.
- OEM preference: frames, sills, and glass inserts, so fit and performance stay where the manufacturer designed them.
Call (844) 651-6043 and we’ll give you an honest read on which direction your door actually needs – free estimates, written line-item quotes, no pressure either way.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We inspect the full door system – slab, frame, sill, threshold, weatherstripping, and hardware – and check for hidden moisture behind the frame and under the sill. The visible problem is rarely the whole story on a coastal door.
- 2
Repair or installation. For repairs, we address the specific failure with parts that fit the Therma-Tru system, then restore the finish with products rated for coastal UV exposure. For replacements, we install a new pre-hung Therma-Tru unit with proper flashing, sealing, and shimming so the door sits square and drains correctly.
- 3
Testing. We operate the door through its full swing, check the latch and deadbolt alignment, and verify the weatherstripping seals evenly against the frame on all four sides. A door that binds or gaps is not finished.
- 4
Warranty walkthrough. Before we leave, we explain what your Therma-Tru warranty covers, what our workmanship covers, and what maintenance the door needs to stay protected under North Miami Beach conditions.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in North Miami Beach
We work on the full range of Therma-Tru entry systems found on North Miami Beach homes. That includes fiberglass entry doors from the Classic-Craft, Smooth-Star, and Fiber-Classic lines, along with Benchmark steel entry doors. We service and install door slabs, pre-hung units, sidelights, frames, sills, thresholds, glass inserts, and the hardware that ties it all together.
For homeowners planning broader work at the same time, we also handle full kitchen remodeling, bathroom remodeling, and impact window installation through the same contract and the same point of contact. Whether you’re adding square footage or upgrading what you already have, your entry door project can sit alongside the rest of the scope rather than requiring a separate contractor to coordinate. That’s how we cover everything from your driveway to your roofline.
We Also Service These Brands
Therma-Tru is one entry system in a larger material lineup. We also specify and work with KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures in the kitchens and bathrooms we build – brand-name materials you can research and verify before you sign anything. If your project reaches beyond the entry, we’re not a single-brand shop handing you off to someone else.
FAQs – Therma-Tru Construction Service in North Miami Beach
No. We are an independent Therma-Tru service provider, not a dealer, and we’re not affiliated with or authorized by the manufacturer. That independence is intentional – our recommendations come from field performance on this coastline, not from a manufacturer relationship. Call (844) 651-6043 for a free estimate.
Yes. We use parts that fit Therma-Tru door systems correctly, preferring OEM parts for structural components like frames, sills, and glass inserts, and high-quality aftermarket components for wear items like weatherstripping and sweeps. We don’t claim to stock genuine Therma-Tru parts – we source what the door needs. Call (844) 651-6043 to discuss your door.
Most repairs, such as weatherstripping replacement or hardware adjustment, are done in a single visit. A full pre-hung door replacement typically takes longer because it involves removing the old unit, checking and repairing the opening, and flashing and sealing the new one properly. Your written estimate will state the expected timeline before work starts.
We service and install Therma-Tru fiberglass entry doors from the Classic-Craft, Smooth-Star, and Fiber-Classic lines, plus Benchmark steel entry doors. That covers slabs, pre-hung units, sidelights, frames, sills, thresholds, glass inserts, and hardware. Call (844) 651-6043 to confirm your specific door.
Not when the work is done correctly. We follow flashing and sealing practices that protect the door’s existing coverage, and we avoid modifications that would compromise it. Before we start, we walk you through what the manufacturer’s warranty covers and what our workmanship covers. Call (844) 651-6043 with questions about your specific warranty situation.
Entry door service is priced per job by the written estimate, and the final price depends on whether the door needs repair or full replacement. When a Therma-Tru project extends into broader remodeling, the typical estimated ranges we work from are below. Call (844) 651-6043 for an exact quote – estimates are free.
| Project | Typical Estimated Range |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Bathroom Remodel | $10,620 – $33,040 |
| Impact Window Installation | $9,440 – $29,500 |
They hold up well when the seals stay intact, but salt air and humidity shorten the life of weatherstripping, sweeps, and factory finishes faster than they would inland. Once a seal fails, moisture reaches the frame, and that’s where the real damage starts. Regular inspection of seals and finish is the single most effective maintenance step for a coastal Therma-Tru door. Call (844) 651-6043 to schedule an inspection.
Sometimes, but only if the rot is confined to a small area and the door core is still sound. When rot has spread through the frame or sill, repair becomes a patch over a bigger problem, and replacing the door system is the more honest recommendation. We inspect the frame and sill before giving you an answer. Call (844) 651-6043 for a free assessment.
A full pre-hung replacement is priced per job by the written estimate, based on the door size, the glass and finish options you choose, and the condition of the opening once the old unit comes out. We give you a line-item quote up front with fixed pricing and no change orders. Call (844) 651-6043 – estimates are free.
Some Therma-Tru door systems are engineered and certified for high-wind environments, but the rating depends on the specific product and configuration. North Miami Beach falls under the Florida Building Code’s High-Velocity Hurricane Zone wind provisions, so verification matters before installation. We’ll confirm what your chosen door is rated for and pull the permits the job requires. Call (844) 651-6043 to talk through your options.
Sticking is almost always a symptom rather than the root problem. The usual causes are thermal movement in the slab, a frame that has settled or swollen from moisture, or worn hinges pulling the door out of alignment. Diagnosing which one is happening is the first step. Call (844) 651-6043 and we’ll take a look.
Book Your Therma-Tru Service in North Miami Beach, FL
If your Therma-Tru door is cracking, sticking, leaking, or simply showing its age against the coastal climate, we’ll give you a straight answer on repair versus replacement and a written estimate before any work starts. We handle the permits, we work warranty-safe, and we back our labor on top of the manufacturer’s coverage. Call (844) 651-6043. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at North Miami Beach Construction.