Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why North Miami Beach Homeowners Choose Dvele Construction
We provide independent Dvele construction service in North Miami Beach: modular shell repairs, seam and flashing maintenance, and full interior finish-out for Dvele homes and accessory units. What sets our Dvele work apart is that we read the build drawings before we touch a joint, and we treat the factory module interface as the starting point for every scope, not an afterthought. We are not affiliated with, authorized by, or backed by Dvele. We’re an independent construction company working on Dvele-built structures, and we say so plainly. Call (844) 651-6043 to talk through your project.
Dvele is a prefab and modular home builder. Its packages range from a full modular single-family home assembled from factory-built modules set on a site foundation, to a net-zero capable package with rooftop solar and battery-ready electrical, to a modular accessory dwelling unit. That means a Dvele owner in North Miami Beach isn’t managing a conventional stick-built house. You’re managing a structure whose envelope was engineered and sealed somewhere else, then joined together here. Where the factory’s work ends is exactly where local permitting, coastal weather detailing, and finish-out labor begin.
North Miami Beach makes that boundary sharper than most cities. The city sits on the Biscayne Aquifer at sea level, and a large share of it falls in the FEMA AE flood zone. Add the Florida Building Code’s High-Velocity Hurricane Zone wind provisions, and nearly every addition, rebuild, and even minor remodel here runs through floodplain elevation review, permitting, and 50% substantial-improvement calculations. On a Dvele structure, that means the module set, the foundation connection, and the exterior detailing all have to satisfy inspectors who are checking elevation compliance before they sign off.
We handle Dvele shells and finish-out as one relationship, alongside our other residential construction work across the city. Whether you’re adding square footage or upgrading what you already have, the goal is the same: a project you can verify, materials you can research, and one point of contact from the foundation to the roofline.
Why Trust North Miami Beach Construction for Your Dvele Construction?
The work on a Dvele home splits in two, and most contractors only know one half. Factory-built modular construction has its own logic at module-to-module and module-to-foundation joints, and those joints need a crew that understands how the shell was assembled before they reopen anything. The other half is ordinary interior construction, and that’s where tolerances get tricky. Factory-set walls don’t move, so cabinets, tile, and vanities have to be scribed and shimmed to the wall that’s actually there.
Our technicians have up to 9 years of experience across modular and traditional residential construction, and we’re comfortable on both sides of that line. We spec-match exterior sealants, flashing, and fasteners to the build documentation, with coastal-rated stainless or approved coated hardware wherever the module shell is exposed to salt air. Interior cabinet and fixture hardware can be quality aftermarket without affecting how the home performs.
On warranties, we work warranty-safe. We document what we open, photograph seam conditions before and after, and keep repairs traceable to the build spec. That matters because Dvele builds to a published assembly, and any change to that assembly has to be defensible if a question about the shell ever comes up. We can’t speak for the manufacturer, and we don’t. What we can do is make sure the work we do on your Dvele structure is documented, code-compliant, and matched to how it was built. Call (844) 651-6043 to schedule a free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in North Miami Beach
Dvele shells hold up well when their exterior details are maintained. In this climate, the failures we see tend to cluster around the same few places:
- Seam joint leaks after wind-driven rain. The joint between two modules, and the joint between a module and its foundation, depends on sealant and flashing that live outdoors year-round. South Florida’s summer storms push rain sideways against those joints, and sealant that’s dried, shrunk, or separated lets water track inward. This is the most common call on a Dvele home here, and it usually shows up as staining on an interior wall well below where the actual gap is.
- Cladding and trim fastener corrosion. Near the Intracoastal and anywhere salt air reaches the exterior, mismatched or non-rated fasteners on factory-finished cladding and trim can show corrosion or leave galvanic staining streaking down the wall. That staining is cosmetic at first and a fastening problem later.
- Rooftop solar penetration leaks. A solar package with battery-ready electrical involves penetrations through the roof membrane, and an integrated roof-to-wall transition that has to stay watertight where the roof meets the module wall. If the crew that set the modules didn’t reopen and verify the flashing around those penetrations, minor leaks develop, and they’re easy to miss until the ceiling below discolors.
- Finish-out tolerance gaps. Cabinet, tile, and vanity setting is scoped separately from module delivery. Factory-set walls don’t let a framer split the difference, so a cabinet run that would have been shimmed out in a stick-built kitchen can leave visible gaps at the wall, out-of-square corners, or a backsplash that won’t sit flush.
- Hairline separation at module connections. Over seasons of thermal movement, a factory joint can move just enough to open a hairline at the interior drywall or paint line. It’s rarely structural. It is a signal to check the exterior seam before patching interior finish, because the cosmetic crack is often pointing at the weather seal.
Dvele Parts & Our Repair-vs-Replace Approach
We don’t stock, carry, or order genuine Dvele parts, and we’re not a Dvele dealer. What we do is choose quality parts that fit Dvele equipment and match the build documentation: exterior sealants, flashing stock, and fasteners spec-matched to the assembly, coastal-rated where the shell is exposed, and available through normal supply channels. Interior hardware, cabinet fittings, and fixtures can be quality aftermarket without harming the home’s performance.
On repair versus replace, the answer is usually repair. A Dvele shell that’s structurally sound and simply due for seam and cladding maintenance is not a replacement candidate. We reopen the joint, replace the failed sealant and flashing to spec, verify the roof-to-wall transition, and repair the module envelope and interior finish-out from there. Full module replacement is rare, and we’d rather show you why it isn’t needed than sell you one. If a joint is sound but the finish-out is dated, a kitchen or bath remodel is the better spend. Call (844) 651-6043 and we’ll tell you which one you’re looking at.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We read the build drawings and walk the structure, paying attention to module-to-module and module-to-foundation seams, roof penetrations for any solar package, and the roof-to-wall transition. Interior staining gets traced upward to the actual entry point rather than patched where it shows.
- 2
Scoped repair or install. We reopen the joint, replace sealant and flashing to the build spec, and use coastal-rated fasteners where the shell is exposed. For finish-out, we scribe and shim cabinets, tile, and vanities to the factory-set walls instead of assuming a stick-built tolerance.
- 3
Water test and verification. Before any interior finish goes back, we confirm the seam and the roof-to-wall detail hold against water. Wetting the joint and checking under it is the step that keeps a repair from recurring.
- 4
Finish-out and warranty documentation. Drywall, paint, or tile goes on last, so it covers a verified repair rather than hiding an open one. We photograph the work and leave you a record that ties each repair to the build spec.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in North Miami Beach
We service the exterior envelope and interior construction of Dvele modular single-family homes, Dvele’s net-zero and off-grid capable packages with rooftop solar and battery-ready electrical, and Dvele modular ADU packages. On the envelope side that means seam joints, module-to-foundation connections, flashing, cladding and trim fasteners, and solar penetration details. On the interior side it means the finish-out that gets scoped separately from module delivery: kitchens, cabinetry, tile and flooring, bathrooms, and walk-in showers. We handle both halves of a Dvele project in North Miami Beach, alongside the broader residential work we do across the city.
We Also Service These Brands
Dvele is one part of a larger capability. Our kitchen and bath work draws on KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, and we’re a multi-brand construction company rather than a single-brand dependency. If you want to look up every product before you sign, you can. Ask us to walk you through the material options and we’ll tell you why we specified each one.
FAQs – Dvele Construction Service in North Miami Beach
No. We are an independent construction company, not authorized, certified, or factory-backed by Dvele, and Dvele does not authorize or warranty work performed by independent contractors. What we can do is work warranty-safe: repair to the build spec, document everything we open, and use spec-matched materials so the assembly matches what the manufacturer built. Call (844) 651-6043 and we’ll be straight with you about what any Dvele warranty question means for your project.
The walls don’t move. In a stick-built home, a framer can shim or plane a wall to make a cabinet run sit flush. In a Dvele modular home, the walls are factory-set and fixed, so cabinets, vanities, tile, and backsplashes have to be scribed to the wall that’s actually there. Get that wrong and you end up with visible gaps at cabinets, out-of-square corners, and tile that won’t sit flat. It’s the single biggest reason a finish-out on a Dvele home needs a crew that knows modular tolerances. Call (844) 651-6043 for an exact quote on your kitchen or bath.
Failed sealant or lifted flashing at the seam where two modules meet, or where a module meets its foundation. North Miami Beach’s summer storms drive rain sideways against those joints, and sealant that has aged, shrunk, or separated lets water track inward. The usual sign is damp staining at an interior wall near a module joint after a heavy storm, often well below the actual gap. A qualified local pro reopens the joint, replaces the sealant and flashing to the build spec, verifies the roof-to-wall transition, and only then addresses the interior finish so the repair doesn’t recur. Call (844) 651-6043 to get it looked at.
Mostly, yes, with one difference. A Dvele ADU is a modular package, so the same fixed-wall tolerance rules apply to the finish-out, and the same seam-maintenance rules apply to the envelope. What changes is permitting. In North Miami Beach, an accessory unit on a property in the FEMA AE flood zone runs through floodplain elevation review and 50% substantial-improvement calculations, so a remodel scope that grows can trigger a review an inland Miami-Dade city wouldn’t require. We plan the scope with that in mind before work begins. Call (844) 651-6043 to scope your ADU project.
Repair, almost always. A Dvele shell that’s structurally sound and due for seam and cladding maintenance doesn’t need replacement. Module replacement is rare and expensive, and it’s rarely the answer to a seam leak or a solar penetration that’s letting water in. Reopen the joint, replace the sealant and flashing to spec, verify the roof-to-wall transition, and the shell performs. Call (844) 651-6043 and we’ll tell you honestly whether you’re looking at maintenance or something more.
These are typical estimated ranges, and the written estimate sets the final price:
| Scope | Typical Estimated Range |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Bathroom Remodel | $10,620 – $33,040 |
| Walk-In Shower Installation | $5,310 – $14,160 |
| Roof Repair | $470 – $2,125 |
Seam and flashing repairs usually land at the low end of the roof repair range; a full kitchen or bath finish-out with cabinetry and surfaces is a different budget. Call (844) 651-6043 for an exact quote: estimates are free.
Book Your Dvele Service in North Miami Beach, FL
Call (844) 651-6043 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll read your build drawings, walk the seams and finish-out with you, and give you a written, line-item quote before anything starts. Independent Dvele service in North Miami Beach, from the module joint to the last tile.
Written by the team at North Miami Beach Construction.